ESYSE-E200P2-MINI

Industrial Real-time Ethernet Multiprotocol solution based on SIEMENS ERTE200P Step-1/2

The ESYSE-E200P2-MINI is designed for use as or in various types of field devices, fast IO devices, synchronous drives and encoders, highprecision measurement instrumentation, and any other kinds of high-performance and intelligent automation devices.
Profiles such as PROFIsafe for failsafe communication or PROFIdrive for drive control can be seamlessly integrated.

Embedded Compact Solution

ESYSE has a large number of pre-developed modules based on the ERTEC 200P controller, which differ in design (square, round), size (down to a 30×50 mm miniature version for oper-ation with a host controller), communication, application and connection technology (LAN, USB and many more …).
The design of the modules is so powerful and flexible that they can be completed after a very short development (redesing) time for any defined application. The complete hardware and software design usually takes place within a few weeks. After that, the ready-to-install mod-ules can be used immediately. Upon request, ESYSE supports its customers in the certification process.

Overview

MPU: ERTEC200P Step-2; Programmable Enhanced Real-Time Controller
ROM: 8/16/32 MB
RAM: SDRAM (32 Bit Data); 64 Mega-Byte
FRAM: 8/16 KB
Host Interface: SPI or UART
Ethernet Connection: Dual Port RJ45 / Borad-to-Board
Sensor Interface: SPI (TTL)
Host Interface: Borad-to-Board, SPI / UART (3.3 V)
Programming Interface: JTAG-Interface for ARM Debugger
General Purpose Input/Output (GPIO)
Status LEDs: Module and Net Bicolor, Link-LEDs

Specification

Dimension (LW): 50 x 30 mm
Operating temperature: -45° – 85°
Power-Supply: 3.3 V DC Input
Wattage: min. 0.5VA, max. 3VA, Nominal: 1VA (with 1 millisecond network connection IO-cycle time)
PROFINET Certification Version 2.33
EtherNet/IP Certification Version CT15

PROFINET

PROFINET Version 2.33
PROFINET Stack: SIEMENS Version V4.5.1
Conformance Class: CCA, CCB and CCC
Protocols: PROFINET, Ethernet/IP, EtherCAT, MODBUS,..
Min. IO-Cycle Time: 125us
Max IO Data size 1440

EtherNet/IP

Transport Class: 0,1,2 and 3
Objects: Ethernet Link, TCP/IP, Port
Additional protocol:
- ACD: Address Collision Detection
- DLR: Device Level Ring
- QoS: Quality of Services
Min. IO-Cycle Time 1ms (Implicit messaging)
Max. Implicit messaging connections: 5
Max. Explicit messaging connection: 10

App/Device Profile

PROFINET PROFIdrive Profile Drive Technology
- State-Machines: Speed and Positioning
- Application Class AC1 up to AC6
- Standard Telegrams: 1-9 and 20
- PROFIdrive Warning and Fault Buffer handling
- Life-Sign Monitoring
- PROFIdrive Single and Multi-Parameter Access
PROFINET PROFIdrive Encoder Profile
- Encoder Class 1, 2, 3 and 4
- PROFIdrive Position Feedback State-Machine
- Standard Telegrams: 81,82, 83, 84, 86, 87, 88, 89
- PROFIdrive Warning and Fault Buffer handling
- Life-Sing Monitoring
- PROFIdrive Single and Multi-Parameter Access
CIP ( Common Industrial Protocol):
- Drive Technology
- Encoder Device Profile (Position Sensor Object,…)
- Generic Device
- IO,…
Applications: Drive, Encoder, Pump, Valve, IO-Device, General

Downloads / Order Infos

Downloads

Data sheet (PDF | 1,0 MB)
Product overview (PDF | 4,0 MB)

Order Infos

ESYSE as Development Partner. Upgrading of an existing automation device (drive, pump, encoder, …) for Ethernet communication, e.g. on PROFINET.

– Contact: www.esyse.com | order@esyse.com